FEATURES AND BENEFITS

• Low-bleed formulation helps fight dye migration on cotton/poly blended fabrics especially “hoodies”.
• Creamy texture enables lower squeegee pressure easily covering dark backgrounds with less ink.
• Formulation does not include any “blowing agent” which results in a smooth surface that perfectly accepts overprint colors.

TECHNICAL INFORMATION

Gel Temperature: Ink will surface gel at 240° F (116° C).

Curing: Excalibur Ink will fully heat cure when the entire ink film reaches 320°F (160°C) and held at this temperature for at least 15 seconds. Thicker deposits of Sabre White will require longer dwell times to obtain this temperature.

Heat Transfers: This ink may be used to produce cold-peel transfers.

Screen Mesh: For direct printing, a 40-230/inch (16T-72Tcm) mesh may be used.

Ink Modification: Because plastisol inks are thixotropic and can body up during storage always stir ink thoroughly prior to printing or adding reducers. If necessary 501PF Curable Reducer may be added to increase printability of ink and to help clear ink from the screen mesh. CAUTION: Adding too much 501PF Curable Reducer will reduce opacity and diminish bleed-resistance.

Squeegee: Medium Durometer (70) or Triple Durometer (90/70/90) is recommended.

Stencil: All stencil systems compatible with plastisol inks may be used to print Sabre White.