500 General Purpose Plastisol Inks
Excalibur’s 500PF Series is the printer’s choice for high-production, wet-on-wet direct printing on 100% cotton light colors or on top of a flashed white underbase. 500PF is available in a wide range of colors all formulated to minimize build-up on the backs of screens. One of Excalibur’s most versatile inks 500PF can be used for producing cold-peel transfers as well as being the ink series most widely used with Excalibur’s additives suede or puff additive to transform 500PF Series colors into special effects inks.
Excalibur’s 550PF Series offer printers the ulitmate in opacity and printability for direct printing 100% cotton dark fabrics. For best results if printing a color by itself either a double stroke or a print/flash/print technique should be utilized.
Reflex Blue
TECHNICAL INFORMATION
Gel Temperature: Ink will surface gel at 240° F (116° C).
Curing: Prints will fully cure when the entire ink film reaches 320°F (160°C) for at least 15 seconds.
Heat Transfers: 533PF AND 550PF can be used in printing cold peel transfers.
Mesh: For direct printing a 60-305/inch (24T-122Tcm) may be used.
Stencil: Any stencil compatible with plastisol inks may be used.
Modification: Because plastisol inks are thixotropic and can body up during storage always stir ink thoroughly prior to print or adding reducers. If necessary 501PF Curable Reducer may be added increase printability of ink and to help clean from the screen. CAUTION: Adding too much 501PF Curable Reducer will reduce opacity and bleed-resistance.
Squeegee: 70 durometer or 90/70/90 triple durometer blades are recommended.
Printing Techniques: A print/flash/print technique may be necessary to produced desired results on dark garments.
Clean-up: Use Enviro Series 2000 Green or Enviro Series TR Blend.